Performance Boats

Subscribe to Performance Boats feed Performance Boats
Performance Boats Online is a community source for boating discussion and videos. We have a large very active community. Sign up and enjoy the latest in lake and offshore boating information.
Updated: 40 min 45 sec ago

Canyon Drag Boat, Complete Less Motor

Tue, 01/02/2018 - 10:58
Probably could have modified the other ad, but was easier to post a new one.
92 Canyon Drag Boat, Complete less motor $17,500
Exceptionally clean, fast, safe and consistent bracket boat that could easily be made into a lake boat. All the best hardware. Won many events, 2 championships and made finals in 3/4s of the races entered. Has taken awards at a few shows we’ve entered and always a head turner.

• Originally laid up by Carter, bottom by Mettler. 600 lb hull, always been fast with modest HP.
• Floors not perfect but very nice.
• Polished V-drive with tapered bearings, 18s in it now
• New MSD Digital 6 ignition box
• Magnafuel 500 pump, factory rebuild before 2017 season
• New Bergeron prop shaft. Strut align bored and set up with Tercite Bearings by Bergeron.
• Grose prop, just back from Grose for annual check up
• Matching second seat with brackets, scoop, work cover.
• California Registration on boat.
• D-21 Quadrant, steering stuffing box and cav plate shaft seal
• All numbers/lettering will be removed. Graphics on deck painted and permanant.
• Leaman road dolly trailer with swing away tongue, removable strut guard, lights/DOT tires. Not registered, but could be easily.

Contact David Poffenbarger 925 5nine5-4two44 Call or text anytime before about 9p PST

Pic with the deck showing was the old trailer. New trailer shown in side view picture...
Attached Thumbnails    

Speed Trim electric cavitation plate controller ?

Tue, 01/02/2018 - 08:42
Took the floor out in my newly acquired daycruiser and found this setup. Does anyone know who could rebuild one of these ? I haven't tried it to see if it works yet, but it was pretty damp under there for a while.

Underwater LED lights.....

Tue, 01/02/2018 - 03:30
Hi guys..Over the past year I have been working on improving the lights I had made already. The old ones work well, but just like anything else, everything could be improved...Well here they are. The housing is 3/4" shorter and lighter.(1-1/2" tall x 5" round) The led's are high quality 50 watt CREE chips. I now also include a controller box to regulate the power. It may be a little bit more hardware, but I feel it is a better setup. Before the wire was regulating the power, now there are separate drivers to control them. Everything will be labeled and ready to go. Check them out. If you are interested I will have another 2 sets ready to go by the end of the week. The price did go up a little since the parts cost more. The price is $350..Blue only now. These can be made with a wireless remote setup for $50 more. Just wire the controller box to your battery and your done.
Send me an email if your interested.
Thanks Marc Attached Thumbnails          


Eng. Parts Dana Marine/Marine Industries West O2 Plates

Tue, 01/02/2018 - 00:51
Dana Marine is now Marine Industries West.

Dana Marine/Marine Industries West O2 Plates - Oxygen Sensor Plates

1 Pair of O2 plates.

$150 Attached Thumbnails  

[Question] Need some help from the experts

Mon, 01/01/2018 - 18:06
I'm thinking about putting a k motor in my biesemeyer. Would the motor placement be different from the norm. I currently am running a 600hp bbc. Any advice would be greatly appreciated. Thanks Jeff

The Red Pearl Wildercraft Pro Gas jet Quick Eliminator

Mon, 01/01/2018 - 06:49
$13,000 Oklahoma City, OK
Priced for quick sale.

Have not run it since buying from Rob and building a brand new big bowl Dominator pump for it.
Upgraded to Calgo steering. Steering box installed have brand new cables for it that need ran.
Custom made CO2 diverter system. Needs painted and reinstalled.
Currently it's buried in the garage. :)sphss

1989 Wildercraft full tunnel 320 lb. hull
Record Holding pro Gas Jet.
Selling minus engine or minus pump.
Pump is brand new never ran.
Tandem axle trailer with removable tongue.
Center steer with Calgo steering system.
Under seat battery location.
10 gallon powdercoated fuel tank.
Work covers and heavy towing cover.
Chevy mount plates SB front plate.
Lenco drive shaft system.
Wilder low profile race intake with an assortment of loaders and shoes.
Dominator suction housing for 9.5” impeller.
Pump braces.
17-4 race shaft Mechanical packing seal.
9.5 impeller race prepped Dominator bowl by Hi-Tech performance.
AA stainless impeller race prepped by Marine Performance Designs (MPD).
Big Mouth pop off valve.
Henry’s inducer.
Mini Droop and place diverter with fine tune nozzle bushings.
Henry’s high flow reverse gate.
CO2 operated diverter, pop off valve and reverse gate.

Can be bought minus pump.
1500 HP twin turbo 385 Small Block Chevy Hybrid EFI methanol can be bought in many configurations

Call or text 918 two six nine 8084
Del City, Oklahoma

A few more pics here:…/ Attached Thumbnails         Attached Images        

Looking to buy..

Sun, 12/31/2017 - 19:35
Looking to buy a 18 or 19 Cp or placecraft, Running boat, BBC, 25k range. I am in California Bay Area, Thanks.

Under 23' 74 Mandella 20’ step deck

Sun, 12/31/2017 - 16:39
I have a 74 Mandella step deck. Floors are solid stringers are solid comes with all hardware but engine plates, engine drive line, and interior

2500 obo

call or text me 5204001222 ryan Attached Thumbnails    

Parts for sale + shipping cost on all parts

Sun, 12/31/2017 - 09:19
Dyno time only Blower shop intercooler + blower belt $1500.00
CMI big tube headers / tailpipes / Gatlin mufflers & transom rings. $5500.00
New 12" black anodized sea strainer $375.00
Used Mater Lube motor pre luber $325.00
New Autolite racing spark plugs AR-3933 & AR-3932 set of 8 $25.00 Attached Thumbnails    

Parts for sale + shipping cost on all parts.

Sun, 12/31/2017 - 07:51
Will sell complete 1471 blower set up from intake to flame arrestor + 3 extra pulleys off motor pictured in add $8500.00 Plus selling other marine parts off motor. Having issue typing add. Attached Thumbnails  

The State of Affairs Concering OUR PRESIDENT!!!

Sat, 12/30/2017 - 19:20
I offer no apology for what I am posting, for this is truly how I feel. Please know this is my opinion and not open for debate. If you don't agree that's your prerogative, but I will not be responding to any or all comments.
I have lived through many United States Presidents counting our current President Trump. In my lifetime I have never seen or heard of a President being scrutinized over every word he speaks, demeaned by the public to the point of disgrace, slandered, ridiculed, insulted, lied to, threatened with death, threatened by some to rape our First Lady, and have his children also insulted and humiliated.

I am truly ashamed of the people of MY country. I am ashamed of the ruthless, insufferable, cruel, Trump haters who have no morals, ethics or values and the irresponsibility of the reporters who feel they have the right to deliver personal opinions just to sway their audiences in a negative direction even if there is no truth in their message. After every other President was elected and the oath of office taken they were allowed to try to serve this country without constant negative scrutiny from our news sources. ALWAYS BEING PRESSURED while news sources search only for negative results from our President will not serve the people of our country. Nor will it create informed Americans. ENOUGH is ENOUGH is ENOUGH.

#MAGA!!!! :))THumbsUp :))THumbsUp

Casale V Drive 10* and 12* cases and gears

Fri, 12/29/2017 - 16:49
I have several Casale 10* cases some are polished, some are not, some have water jacket removed, 1/2 and 3/8 plates. There is 5 bolt and 6, some with pressnuts, price 175 to 300.
5, 12* cases, 2 polished 3 not, all for 3/8” center plate. 150. to 225.
Have box full of bearing caps price 15. to 25.
50+ gear spacers 20. each.
Top input standard bearing covers 15. to 25. Input bearing cover for drive shaft mount 45. to 65.
5 sets of 12* gears 15% 150.00 per set till there all sold.
I still do gear exchange for 65.00
All parts are plus shipping.
This is some of the parts Steve Paterson had so just let me know what your looking for I just might have it.
254-854-2083 or

Increase postal rates

Fri, 12/29/2017 - 12:32

MAKE AMERICA GREAT -- Make things more expensive.
For someone who claims to want to help the middle class, why would you raise the postal rate (tax)? Does he think raising Postal Rates would increase the use of the Post Office when Amazon is already cheaper?

In a tweet on Friday morning, Trump suggested that the United States Postal Service doesn’t charge enough to deliver packages, advantaging Amazon and others instead of the government-backed service.
“Why is the United States Post Office, which is losing many billions of dollars a year, while charging Amazon and others so little to deliver their packages, making Amazon richer and the Post Office dumber and poorer?” Trump tweeted. “Should be charging MUCH MORE!”

Thermostat question

Fri, 12/29/2017 - 11:44
I know we had the discussion with water temp and so on but I forgot to ask if any of you run a thermostat? I know that they say not to worry about water temp, and oil is more important but I'm just wanting to know if anybody runs a thermostat like the ones rex, or cp performance sales? I have the 1 inch magnaflow pump and I was thinking about getting the 3/4 housing but after a lot of input from you guys I don't think I need that and was going to just restrict the water flow, but I was wondering about the thermostat,,,not that I'm going to get one but would that be better? and I was worried that if I did get one would the 1 inch magnaflow pump to much for it? another words would the bypass be open all the time in the thermostat housing ? because of the amount of water that thing flows? just wondering if anyone has run a thermostat with the 1 inch magnaflow? also it says not for sandy conditions but that's all I have ,,,,again not saying I'm getting one just whats the pros-and cons of one?


Fri, 12/29/2017 - 07:47


Thu, 12/28/2017 - 18:46
Anybody know when the first NJBA race for 2018 will be?

9" Calgo Steering Post

Thu, 12/28/2017 - 18:38
9" Calgo Steering post

Just had powder coated, has dimples in the metal that show in the pictures. They can polished out if powder is removed. Post was $200 new

asking $125

Sent from my iPhone using Tapatalk